Phyto-Lab

A small and handy vaporizer from Switzerland. The Phyto-Lab has been created to evaporate more active ingredients from products or plants.

This durable pocket-sized portable vaporizer is made out of medical high grade materials, allowing for improved air circulation and better evaporation without burning – at both high and low temperatures. Whereas combustion sometimes still occurs with other portable handheld vaporizers, this is nearly impossible with the Phyto-Lab vaporizer, if used accordingly.

The Phyto-Lab is built for all kinds of material, solid or liquid.

Download the full English instructions for the Phyto-Lab here.

Phyto-Lab Standard

- The Phyto-Lab Vaporizer
- 1 plastic ferrule
- 10 small grids
- 5 big grids
- 1 cleaning brush included.
- 1 instruction manual

Phyto-Lab Plus

- The Phyto-Lab Vaporizer
- 1 plastic ferrule
- 10 small grids
- 5 big grids
- 1 brazer (torch lighter)
- 1 anti-radiance bag
- 1 short silicon tube
- 1 large silicon tube
- 1 cleaning brush included.
- 1 instruction manual

Usage

Put 3 small grids at the bottom of the tank X (upper part of the herb holder), add a little bit of substance, put a small grid again, again a small bit of substance, a grid again. This is how you create several layers. There are many grids adjustments possible, depending on the product to vaporize. In general, when vaporizing dried herb with the Phyto-lab, creating several layers is not necessary. However, it can make vaporization more efficient.

After filling, heat the part X1 (upper part of the herb holder) for approximately 30 seconds, and then inhale lightly. From that moment the active ingredient is energized. The following times, heat approximately 15 seconds and inhale lengthily, immediately after each heating. To guarantee a minimal risk of combustion, do not heat more than 30 seconds per heating. The first times, in order to avoid over heating, heat progressively and inhale from time to time for a better estimation of temperature. It will take a few days to optimize the gesture. The stronger and longer the inhalation, the more the piece will cool down.

Before the first use, it is advisable to heat the stainless steel grids (screens) to red. Heat the screens with the brazer or a blowtorch lighter.

Download the full English instructions for the Phyto-Lab here.

Warnings

After use, the top of the vaporizer can get very hot. Always allow the unit to cool down before touching it or putting it away, or use a handkerchief to unscrew the top.

Reviews

Post a review  More reviews

Mar 11, 2009 Smokaz said:
    
“Hi! I'm a smoker since 20 years...

To preserve my lungs, I stop smoking and I begin to vaporise!!!!
After some years of using several vaporisers, I find the "phyto-lab" really cool for using outdoor!!!

I use my phyto-lab four month a year in winter on the top of the mountain (4000m) and it's very practice!!!
I m used to practice extreme sports and i don't be affraid to broke it in my pocket

It's better if you have a bigger lighter, you can vaporise quickly...

I enjoy it, and you???
”